This module will allow you to send a welcome message to the new members of the server.
We recommend using this module if you manage a community.
Before proceeding with this article, you must take into account a series of elements that can influence when you are going to carry out any action described on this page:
Filo requires the following advanced permissions: VIEW_CHANNEL
, SEND_MESSAGES
and EMBED_LINKS
.
Filo requires the following basic permission: VIEW_CHANNEL
.
You need ADMINISTRATOR
permission to perform most of the actions in this article.
This module has exceptions, which means that it won't work if some of the requirements mentioned below are met:
VIEW_CHANNEL
, SEND_MESSAGES
and EMBED_LINKS
permissions. 11 If this requirement is met, the module settings will be reset.
To enable the module you must execute the following command: /welcomes enable module:Welcome message
.
Example: /welcomes enable module:Welcome message
.
To disable the module you must execute the following command: /welcomes disable module:Welcome message
.
Example: /welcomes disable module:Welcome message
.
To set the welcomes channel you must execute the following command: /welcomes channel channel:<#Channel/Channel ID>
.
Don't include
<>
when you're running the command.
Example: /welcomes channel channel:#welcomes
.
To set the welcomes channel you must execute the following command: /welcomes message.
You'll have 1 minute to perform this action.
Example: /welcomes message.
You can set variables in the welcome message. You can find a list of all variables by clicking here.
Welcome {{@user}} to the server **{{server.name}}**! 😉 Thanks to you we are **{{server.members}}** total members! 🎉
Message code
Welcome @DiscordUser to the server Awesome Server! 😉
Thanks to you we are 123,456 total members! 🎉Result message
To set the message type you must execute the following command: /welcomes type type:<Normal/Embed>
.
Don't include
<>
when you're running the command.
Example: /welcomes type type:Embed
.
If users have disabled the display of embeds, they won't see the welcome message.
To reset the module settings you must execute the following command: /welcomes reset.
Example: /welcomes reset.
You'll be forced to confirm the action you are about to take. Once you have confirmed the action, you won't be able to recover the previous data.