This module will allow you to disable the Filo commands that you don't want to be used on your guild.
Before proceeding with this article, you must take into account a series of elements that can influence when you are going to carry out any action described on this page:
Filo requires the following advanced permissions: VIEW_CHANNEL
, SEND_MESSAGES
, EMBED_LINKS
and USE_EXTERNAL_EMOJIS
.
Filo requires the following basic permissions: VIEW_CHANNEL
, SEND_MESSAGES
, EMBED_LINKS
, USE_EXTERNAL_EMOJIS
, READ_MESSAGE_HISTORY
and ADD_REACTIONS
.
You need ADMINISTRATOR
permission to perform most of the actions in this article.
You should replace f! with the current prefix you have set. More information on how to change the prefix by clicking here.
This module has exceptions, which means that it won't work if some of the requirements mentioned below are met:
VIEW_CHANNEL
, SEND_MESSAGES
, EMBED_LINKS
and USE_EXTERNAL_EMOJIS
permissions in the channel. 11 If this requirement is met, the commands won't work as long as it is met.
To disable a command you must execute the following command: f!config commands disable <Command>.
The commands of the Core and Developer categories are protected and no command belonging to these categories can be disabled.
Don't include
<>
when you're running the command.
Example: f!config commands disable ping.
The command you disable can't be used until it's enabled again.
To enable a command you must execute the following command: f!config commands enable <Command>.
Don't include
<>
when you're running the command.
Example: f!config commands enable ping.
The command you enable can be used until it's disabled again.
To reset the module settings you must execute the following command: f!config commands reset disabled.
Example: f!config commands reset disabled.
You will be forced to confirm the action you are about to take. Once you have confirmed the action, you won't be able to recover the previous data.